I want to use interconnect studio. I have read the User'sGuide.However,I was unable to access 「interconnect_studio.itg.ti.com.」 ...

I would like to copy over a default image of Linux from an SD card into the eMMC. I currently have copied U-Boot over by following this tutorial: ...

1、M3与TCAN4550的SPI通信正常：表现为读DEVICE ID正常；初始化寄存器的时候进行写后，回读与写的值比较，均通过； 2、M3与TCAN4550的SPI通信连接；TCAN4550与上位机通过CAN2.0B调试工具，，通过如下 ...

The Teaching Your PI Controller to Behave article links (1-10) are not working. Can I have the links to the pdf files please Or Please point me to the righ urls.

See picture,this is Open-loop to Closed-loop Conversion oscilloscope waveform,my motor startup failure at this moment. I need some advice how to optimize this waveform,Make this electromagnetic Angle ...

I want to use LM74801 to power mux 2 batteries but also allow it to conduct reverse current from my load (motor). The DS states that LM74801 allows bi-directional current if the C pin is left ...

I am puzzled by an element of the filter design found in SNVA886: Reduce Conducted EMI in Automotive Buck Converter Applications. A 2k resistor (RF2) appears in parallel with the ferrite (LF2), and is ...

I understand from the Sys/Bios download page that ver. 6.83 supports CCSv10.1.0 or higher. Our customer would like to know how to create a Sys/Bios project in CCS ver. 12. Are the training videos in ...

Other Parts Discussed in Thread: AWR1642, Hi, I've been using an AWR1642 and a DCA1000 to collect data. I converted the adc_data.bin using MATLAB script. I looked for the timestamp for each sample in ...

I am using the TMS570LC4357 development board. Currently, I can successfully run the TMS570LC43x_rtiBlinky_BL_APP20020.bin using the Hercules_Ethernet_Bootloader. However, when I load my own created ...

Is Motor Control GUI same as InstaSPIN Universal GUI. Also, In the webpage for C2000SDK Motor Control SDK mentions MOTOR-CONTROL-GUI and MCU-MOTOR-CONTROL-GUI. Is both the same? If not, what is the ...