I want to use interconnect studio. I have read the User'sGuide.However,I was unable to access 「interconnect_studio.itg.ti.com.」 ...

I would like to copy over a default image of Linux from an SD card into the eMMC. I currently have copied U-Boot over by following this tutorial: ...

See picture,this is Open-loop to Closed-loop Conversion oscilloscope waveform,my motor startup failure at this moment. I need some advice how to optimize this waveform,Make this electromagnetic Angle ...

I have a problem with running my CLA CODE when I run my program in flash. When i run thise program in RAM, i don't have these problems. Problem description: CLA TASK1 is triggered by int 6.11 (SD1).

I am using the TMS570LC4357 development board. Currently, I can successfully run the TMS570LC43x_rtiBlinky_BL_APP20020.bin using the Hercules_Ethernet_Bootloader. However, when I load my own created ...

I would like to know if the REGIN pin on the BQ76952 will have 5.5 V output if I connect my charger to the BQ76952 provided the collector of the BJT is connected to the common drain of the FET's and ...

as always thanks a lot for your great products and namely the current and voltage sensors line of products. This time we are using the INA219 on our design to measure the 24V input voltage connected ...

I try to make my own flowmeter with EVM430-FR6047 module, but when I connect the EVM430-FR6047 to the Ultrasonic Sensing Device Center (water mode), a message appears: "HID device connected, but could ...

Is Motor Control GUI same as InstaSPIN Universal GUI. Also, In the webpage for C2000SDK Motor Control SDK mentions MOTOR-CONTROL-GUI and MCU-MOTOR-CONTROL-GUI. Is both the same? If not, what is the ...

The Teaching Your PI Controller to Behave article links (1-10) are not working. Can I have the links to the pdf files please Or Please point me to the righ urls.

I am facing an issue with balancing feature. I am trying to test external cell balancing via AFE through 0x0083 CB_ACTIVE_CELLS() command. It works in one hardware variant and not in other. What could ...

I am puzzled by an element of the filter design found in SNVA886: Reduce Conducted EMI in Automotive Buck Converter Applications. A 2k resistor (RF2) appears in parallel with the ferrite (LF2), and is ...